Lpic-1 & Lpic-2 Masterclass: Dein Weg Zum Linux Experten
[Only registered and activated users can see links. Click Here To Register...]
Lpic-1 & Lpic-2 Masterclass: Dein Weg Zum Linux Experten
Zuletzt aktualisiert am 8/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: Deutsch | Size: 16.47 GB | Duration: 36h 30m
Werde ein echter Linux-Experte mit der LPIC-1 (101-500 & 102-500)-Zertifizierung und dem ersten Teil des LPIC-2 (201-450
What you'll learn
Vorbereitung auf die zweite der beiden LPIC-1 Pr fungen (101 und 102)
Vorbereitung auf die erste der beiden LPIC-2 Pr fungen (201)
Unterschiedliche Linux-Systeme im Detail
Wie man ein Linux-System installiert und administriert wie ein Profi
Requirements
Keine Vorkenntnisse n tig
Interesse an Linux und der Systemadministration
Description
Dieser Kurs bereitet Dich ausf hrlich auf die aktuellen LPIC-1 Pr fung (Nr. 101-500 & 102-500) LPIC-1 Zertifikats vor , und ebenso auf den ersten Teil der LPIC-2 (201-450) Zertifizierung in der aktuellen Version von 2022.Was ist berhaupt das LPIC-1 / LPIC-2 Zertifikat?LPI - das LInux Professional Institute - ist eine distributionsunabh ngige Organisation, die Dein Linux-Wissen mit einem Zertifikat belegt. Das LPIC-1 Zertifikat ist das Zertifikat f r Linux-Administratoren. Wenn Du dieses Zertifikat erlangen kannst, stellst Du unter Beweis, dass du Linux-Server administrieren kannst. LPIC-2 ist die zweite Zertifizierung im Multi-Level-Zertifizierungsprogramm (Certified Linux Engineer). Die zweite Zertifizierung belegt, dass Sie die Administration von kleinen bis mittleren gemischten Netzwerken beherrschen. Bei Arbeitgebern sind solche Zertifikate in der Regel sehr gefragt, denn sie zeigen schwarz auf wei , was du kannst. Auch f r das eigene Wohlbefinden ist es toll wenn man etwas, das man gelernt hat, schriftlich best tigt bekommt.Was wirst Du in diesem Kurs lernen?Dieser Kurs orientiert sich zu 100% an den Pr fungsvorgaben von LPI. Alle Themen, Programme und Kommandos, die LPI festgelegt hat, werden in diesem Kurs ausf hrlich besprochen.Manuel End hat die LPIC-1 Pr fung 2017 und sp ter den LPIC-2 abgelegt. Rene F rst kommt urspr nglich aus der Red Hat Zertifizierungswelt und hat mit dem Linux Enterprise Kursen wie dem RHCSA 1 - 3 einige erfolgreiche Kurse zu Linux Zertifizierungen ver ffentlicht. Wir pers nlich lernen lieber mit Videokursen als mit B chern. Leider sind deutschsprachige Videokurse in diesem Bereich sehr rar. Englischsprachige Videokurse gibt es einige, aber selbst wenn man Englisch spricht, ist ein deutschsprachiger Kurs immer noch einfacher zu verstehen, da es f r uns die eigene Muttersprache ist.Was uns bei diversen Kursen und B chern in der Pr fungsvorbereitung gest rt hat war, dass die entsprechenden Themen fast immer sehr oberfl chlich behandelt wurden. Es wurden einem dann h ufig irgendwelche Befehle und deren Optionen vorgesetzt und das war es auch schon. H ufig fehlten genaue Erkl rung was diese Kommandos genau bewirken, wof r man sie "im echten Leben" verwenden w rde usw..Wir haben uns M he gegeben diese L cke zu schlie en und s mtliche Kommandos ausf hrlich zu erkl ren und anhand von Beispiele darzulegen wie man sie verwendet und teilweise auch wie man sie NICHT verwendet.Wenn Du diesen Kurs erfolgreich absolviert, alle praktischen bungen durchgef hrt und intensiv gelernt hast, dann wird die LPIC-1 (101-500 & 102-500) und der ersten Teil der LPIC-2 (201-450) Pr fung ein absolutes Kinderspiel f r Dich sein. Der zweite Teil der LPIC-2 (202-450) befindet sich in Arbeit und wird in einem weiteren Kurs ver ffentlich, dieser ist nicht Bestandteil dieses Kurses. Ebenfalls kannst du die erweiterten bungsfragenkatalog gesondert erwerben, der dir hilft noch einfacher f r deine LPIC Pr fungen zu lernen.
Who this course is for
Linux-Interessierte,Linux-Interessierte, die eine LPIC-1- oder LPIC-2-Pr fung anstreben,Zuk nftige Systemadministratoren,Linux-Interessierte die eine Karriere in diesem Bereich anstreben
Homepage
Code:
https://anonymz.com/?https://www.udemy.com/course/lpic-1-lpic-2-masterclass-dein-weg-zum-linux-experten/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://nitroflare.com/view/DF837168DCD3610/LPIC1_%26_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part1.rar
https://nitroflare.com/view/39204F0D496D043/LPIC1_%26_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part2.rar
https://nitroflare.com/view/DD2044F19385F69/LPIC1_%26_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part3.rar
https://nitroflare.com/view/363F6A40DA42180/LPIC1_%26_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part4.rar
Code:
https://rapidgator.net/file/ea15e379d5f123d894b6d0d6063d270c/LPIC1_&_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part1.rar.html
https://rapidgator.net/file/6493c49504f7f166ef02dd9368e36a2d/LPIC1_&_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part2.rar.html
https://rapidgator.net/file/ed6bd3f1f94d41d51dadd59f5e81ffd4/LPIC1_&_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part3.rar.html
https://rapidgator.net/file/d83d48f30db6f45798ab306ad5344b53/LPIC1_&_LPIC2_Masterclass_Dein_Weg_zum_Linux_Experten.part4.rar.html
Comptia Linux+ Xk0-004 Latest Online Certcamp & Mock Exam
[Only registered and activated users can see links. Click Here To Register...]
Comptia Linux+ Xk0-004 Latest Online Certcamp & Mock Exam
Last updated 11/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 12.10 GB | Duration: 16h 49m
Get free Mock Exam and Flash Cards - Prepared and Developed by CompTIA Certified Trainers & Professionals.
What you'll learn
Hardware & System Configuration
System Operation & Maintenance
Security
Linux Troubleshooting & Diagnostics
Automation & Scripting
Requirements
2 years of IT Experience is highly recommended or equivalent knowledge in Networking and Operating Systems.
Description
Certcop (A division of Secbay Inc.) A proud member of CompTIASecbay and its partners have provided successful training to many top-edge companies worldwide. They have successfully delivered instructor-led classroom as well as virtual-live training and certification for many industry leaders such as DoD, DHS, US Army, US Navy, US Airforce, Unisys, ICE, BAH, Booz Allen Hamilton, Freddie Mac, Guidewell Source, Disney, Navarro, Apple, Amazon, Deloitte, Seagate and many more.CompTIA Linux+CompTIA Linux+ is an intermediate-level IT certification that gives Linux knowledge to IT workers. It verifies the skills required of an entry-level Linux systems administrator. It is suitable for people who desire to take on the role of Linux administrator but lack considerable expertise or certification.Candidates for the new CompTIA Linux+ certification must only pass one exam. The new certification, however, is no longer qualified for the LPI 2-for-1 offer.The CompTIA Linux+ certification is the only job-focused Linux certification that covers the most recent basic abilities required by hiring managers.Unlike prior certifications, the new exam contains performance-based and multiple-choice questions to identify people who are capable of performing the job.The exam covers tasks connected with all major Linux distributions, laying the groundwork for advanced vendor/distro knowledge.Program objectives1.0 Hardware and System Configuration 2.0 Systems Operation and Maintenance3.0 Security4.0 Linux Troubleshooting and Diagnostics 5.0 Automation and Scripting
Overview
Section 1: Introduction
Lecture 1 Introduction to linux+
Lecture 2 Preparing Your Environment
Lecture 3 Sifting Through Services
Lecture 4 Managing Files And Directories
Lecture 5 Searching And Analyzing Text Part 1
Lecture 6 Working With Text Part 2
Lecture 7 Explaining The Boot Process
Lecture 8 Maintaining System Startup And Services
Lecture 9 Configuring Network Connections
Lecture 10 Gui Environments
Lecture 11 Adjusting Localization Options
Lecture 12 Administering Users And Groups
Lecture 13 Handling Storage
Lecture 14 Protecting Files
Lecture 15 Governing Software
Lecture 16 Kernel Modules
Lecture 17 Applying Ownership And Permissions
Lecture 18 Looking At Access And Authentication
Lecture 19 Implementing Logging Services
Lecture 20 Linux Firewalls
Lecture 21 Embracing Security Best Practices
Lecture 22 Network Performance
Lecture 23 Managing Performance In Linux
Lecture 24 Troubleshooting User Issues
Section 2: Free Mock Exam and Flash Cards
Lecture 25 Free Flashcards
Network admins, System admins, Unix Admins and who wish to gain a solid understanding Linux+ its usage in real world applications.
Code:
https://anonymz.com/?https://www.udemy.com/course/comptia-linux-xk0-004-certcop/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/0ed71595986f04c081b2df43b6fc1825/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part1.rar
https://rapidgator.net/file/9489832fec1b2971ace11a404e3cbba4/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part2.rar
https://rapidgator.net/file/be01d48bdd83897adf74c6397a41f111/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part3.rar
Code:
https://nitroflare.com/view/EF587D8011F7A5B/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part1.rar
https://nitroflare.com/view/0B909B98199CF7E/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part2.rar
https://nitroflare.com/view/62C58C801F709A9/CompTIA_Linux_XK0004_Latest_online_CertCamp_Mock_Exam.part3.rar
CCNA 200-301 Complete course - Not Just another CCNA course
[Only registered and activated users can see links. Click Here To Register...]
CCNA 200-301 Complete course - Not Just another CCNA course
Published 10/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 187 lectures (8h) | Size: 14.7 GB
A complete course which covers all the exam topics of CCNA 200-301. It includes 18 Hours of Theory and 9 Hours of Lab.
What you'll learn
This course covers all exam topics of the CCNA 200-301 Exam and will enable you to pass the exam. It includes all learning notes and hands-on Lab Manuals.
Become confident in Network & Security Fundamentals, Routing, Switching, wireless Technology, IP services, Network Automation & programmability
To setup, configure and troubleshoot real networks in packet tracer and GNS3 tool. Also, learn how real-world network works
Learn different career options in the networking field, what kind of jobs you can take, and why you must pursue your career in this field?
This course will make you from ZERO to HERO in the networking field
It will give you WINGS to FLY HIGH and take your career to the next level
Requirements
This is beginner level course and does not require any pre-requisite knowledge of networking
However, the candidate must know how to use a computer with internet connection
Description
Learn CCNA from a Triple CCIE (R&S, Security, SP) certified instructor in just 27 Hours. The instructor has 15 years of extensive experience in the network industry. It is an engaging course which include animations on several important topics, infographic slides and extensive lab practice.
The course is divided into six different chapters as follows
1. Network Fundamentals
2. Network Access
3. IP Connectivity
4. IP Services
5. Security Fundamentals
6. Automation and Programmability
In Network fundamentals chapter, we have covered History of Networking Standards,TCP/IP, OSI, Transport Layer, TCP & UDP, Multiplexing, Virtualization, Cloud Computing, Cabling types, IPv4 & IPv6 addressing, IPv4 subnetting, Default Gateway.
In Network Access chapter, we have covered Switching technology, Wireless technology, and Cisco WLAN deployments.
In IP Connectivity chapter, we have covered IP routing process, static and dynamic routing, and FHRP protocols.
In IP Services chapter, we have covered DNS, NAT, DHCP, SNMP, FTP, TFTP, and QOS.
Security fundaments chapter is composed of security terminologies, different types of attacks & vulnerabilities, AAA, TACACS+, RADIUS, Security program, Internet VPN, ACLs, standard and extended ACL.
Automation & programmability chapter is comprised of Types of planes, controllers, SDN, NBI, SBI, APIC, ACI, Cisco SDA, Rest API, Software CRUD actions, HTTP verbs, URI, DATA Serialization, JSON, traditional configuration model versus centralized configuration model, ANSIBLE, PUPPET, and CHEF.
So, are you ready to Jumpstart your career in networking?
Who this course is for
A person who is passionate to begin his career in the field of IT and Networks with ZERO knowledge
College students, Undergraduate students, and Fresh graduates who wish to get a thorough idea about IT & Network field and its future potential
Entry Level IT engineers who want to grow their career to the next level in the field of networking
System Engineers & administrators, cloud engineers, network security engineers, and IT desktop support engineers who lack network & switching infrastructure knowledge, how network functions, how traffic flows into the network end to end, and how to troubleshoot the basic network problems
Code:
https://anonymz.com/?https://www.udemy.com/course/ccna-200-301-complete-course-not-just-another-ccna-course/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/6d32174b37b156e0ecd522769b2fef67/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part1.rar
https://rapidgator.net/file/fab741e96d8d8b68aa9cba515e9d9bb7/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part2.rar
https://rapidgator.net/file/94d880f16ca5db49ca7225a20c71b424/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part3.rar
Code:
https://nitroflare.com/view/27EB584EF9675C3/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part1.rar
https://nitroflare.com/view/F5C9D7695A9CE5F/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part2.rar
https://nitroflare.com/view/F27D8FEAF30981E/CCNA_200-301_Complete_course_-_Not_Just_another_CCNA_course.part3.rar
Autocad- Corso Completo - Con Certificato Finale
[Only registered and activated users can see links. Click Here To Register...]
Autocad- Corso Completo - Con Certificato Finale
Ultimo aggiornamento in data 12/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 48 KHz
Language: Italiano | Size: 10.34 GB | Duration: 21h 37m
Impara ad usare Autocad 2D e 3D in modo veloce!
What you'll learn
Saper utilizzare i comandi base di Autocad
Comprendere l'uso degli stili grafici
Realizzare progetti in 2D e in 3D
Quotare i progetti facilmente
Disegnare un progetto partendo da un disegno meccanico
Requirements
Avere un pc e un mouse
Description
Questo corso, l'ho realizzato per te con l'obiettivo di risucire a far capire autocad ,nelle sue versioni,che attualmente sono sul commercio,anche a chi non ha mai progettato un disegno con Autocad.Sin dai primi video,ho cercato di semplificare il linguaggio tecnico,poich il disegno tecnico il baricentro di questo corso.Ho utilizzato un linguaggio che si usa tutti i giorni,creando degli esercizi che sono allegati nelle risorse del video,e che sono scaricabili,dei veri e proprio progetti in DWG (estensione di Autocad),modificabili e aperti alla modifica,disponibili nelle risorse del corso.Si parte dai comandi principali,per arrivare a raggiungere un livello di padronanza completo del programma Autocad.Autocad gi nelle versioni successive,mano mano che vengono rilasciate delle nuove,introduce dei forti cambiamenti a livello di facilitazione ,in modo che il disegnatore/progettista,con meno comandi ottenga un risultato porfessionale,cio quello che faceva prima,lo fa adesso con un solo comando.Pensiamo al comando rivoluzione di Autocad,che permette partendo da una vista in 2D ,di ruotare attorn ad un asse e traslarlo in 3D,tutto questo con un solo comando da scrivere.Autocad , disponibile per piattaforma Windows, disponibile anche su Mac con una macchina virtuale,(personalmente l'ho verificato su Windows 11).Nel video si spiega anche quello che non c' nei comandi,poich suppondiamo per trovare un centro di un cerchio,bisogna trovare delle linee di costruzione da effettuare,anche questi procedimenti sono compresi nel corso.Il programma Autocad per gli studenti dei licei/universit permette di avere una licenza "educational",una licenza a vita,ma che ha delle funzioni limitate rispetto alla liceza commerciale che usano per esempio le aziende.Per chi lo vuole utilizzare senza comprare a una prova di 30 giorni,che permette di provare e salvare anche dei disegni illimtatamente,alla fine della prova il programma chieder una somma,per chi lo vuole acquistare,e per chi non ineterssato,pu anche disintallarlo
Who this course is for
Fornire una preparazione in modo da svolgere autonomamente un progetto
Code:
https://anonymz.com/?https://www.udemy.com/course/autocad-dalle-basi-al-progetto-finale/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/9bfe49e733b16dba3a1a2c999a8c40d5/AutoCad_corso_completo_con_certificato_finale.part1.rar
https://rapidgator.net/file/d39c7a2ec77616a0c7f49120b2599791/AutoCad_corso_completo_con_certificato_finale.part2.rar
https://rapidgator.net/file/504cd9147aad6be2899963703d2891b1/AutoCad_corso_completo_con_certificato_finale.part3.rar
Code:
https://nitroflare.com/view/BBBAE04EEC1B185/AutoCad_corso_completo_con_certificato_finale.part1.rar
https://nitroflare.com/view/AC8C3B5D507B6B1/AutoCad_corso_completo_con_certificato_finale.part2.rar
https://nitroflare.com/view/24DC8B967ACB8FC/AutoCad_corso_completo_con_certificato_finale.part3.rar
C Programming Language Hands-On-Lab Challenge
[Only registered and activated users can see links. Click Here To Register...]
C Programming Language Hands-On-Lab Challenge
Published 12/2022
Created by Atish Jain
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 140 Lectures ( 22h 30m ) | Size: 13.9 GB
Master C Programming Language Skills in Practical Way. Become a better Programmer in other languages by learning C first
What you'll learn
OVER 120+ Hands-On Practical Programming Exercises of C Programming
Understand the Core Concepts of the C Programming Language with Real Time Examples
Create your first C Application
Learn one of the most popular, widely used languages in the world
Requirements
A computer with Windows, Linux or Mac OS.
Code Blocks IDE or Any Other IDE for Writing C Programs
Basic Knowledge of C Programming is Required ! This course is NOT for Absolute Beginners!
Note: We have Used Windows 10 OS and Code-blocks IDE for Writing Programs throughout the course.
Description
C is a good programming language to get started with. and It's a great language to add to your resume!Maybe you have some experience In writing Simple C Programs, but want to learn C in-depth Or perhaps you are stuck in a low-paying programming job and want to move up to a better, more senior position. Learning C can help you!The fact is, learning how to program in C is not only an excellent programming language to get started with, but it will also make you better at programming in other computer languages!Note: We have Used Windows 10 OS and Code-blocks IDE for Writing Programs throughout the courseWhy learn C Programming?C is often considered to be the mother of all languages because so many other languages have been based on it.Though C is simple it is one of the most powerful languages. it was created over 50 years ago, it is still it is ruling the Programming world. It is usually in the top 5 or 10 most popular and most widespread programming languages in the world.Learning C can actually make you better at programming in other languages like C++, Java, or C# by equipping you with a Programming Logic of what the computer is actually doing when you run your programs.By learning how things really work "under the hood", and understanding memory space, CPU architecture, and so on, you can create more efficient programs, and obtain a huge advantage over other programmers in the process.If you want to become a better developer, learning C is a great way to start!Why enrolling in this course is the best decision you can make.By the end of this course, you will understand the Programming Concepts in a Practical way, and make yourself more marketable for entry-level programming positions.You will understand variables and the different data types, be able to utilize functions and arrays, understand the concept of pointers, and learn about control flow (decision statements and iteration).You will be in a position to apply for real-time programming positions, and truly understand the core language that most modern languages are based on!If you have previously used the C programming language, then this course will deepen your understanding of it. This course does not skip on the details. You will learn how to write high-quality code and become an excellent problem solver. This course does not just present how to code in the C programming language, but, also includes all the details on "why" you are doing the things you are doing. At the end of this course, you will fully understand the concepts of the C Programming language.Your instructor, Atish Jain has been teaching students for over 15 years via Offline online classes. This means you are learning from someone who has all the professional training, skills, and experience you need to teach you how to become proficient in the C programming language.If you are ready to get that first paid programming job or to move up to a more senior programming position, then this course is for you!Your new job or academic career opportunity awaits! Why not get started today?Click the Signup button to Enroll for the course to Kick start your Coding Journey!AtishJain-Coding Career Expert
Who this course is for
Who Ever Wants to Learn C Programming in Practical Way with Real time Examples
Anyone Who has Basic Knowledge of C Programming Can Improve their Programming Skills
Code:
https://anonymz.com/?https://www.udemy.com/course/c-programming-language-hands-on-lab-challenge-in-30-days/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/56c1f9c7754e52939ececdb6118f10ad/C_Programming_Language_Hands-On-Lab_Challenge.part1.rar
https://rapidgator.net/file/395b4e8129b063b0c620cee37fc01485/C_Programming_Language_Hands-On-Lab_Challenge.part2.rar
https://rapidgator.net/file/1a09324be9d876bf8d482e762028a12f/C_Programming_Language_Hands-On-Lab_Challenge.part3.rar
Code:
https://nitroflare.com/view/6AA1E74938B0632/C_Programming_Language_Hands-On-Lab_Challenge.part1.rar
https://nitroflare.com/view/D073E1AD63E4CEE/C_Programming_Language_Hands-On-Lab_Challenge.part2.rar
https://nitroflare.com/view/5D587811B01AF62/C_Programming_Language_Hands-On-Lab_Challenge.part3.rar
Embedded Linux Step by Step Using Beaglebone Black
[Only registered and activated users can see links. Click Here To Register...]
Embedded Linux Step by Step Using Beaglebone Black
Updated 12/2022
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 10.7 GB | Duration: 130 lectures 16h 8m
What you'll learn
[/b]Understanding ROM Uboot-Kernel boot process on Linux-ARM systems and Testing
Kernel, Bootloaders compilations Step-by-Step and testing on Beaglebone Hardware
U-Boot, MLO, SPL, explanation and Testing
Understanding various sub systems of AM335x SOC such as GPIOs, I2C, MMC, boot modes ,etc
Understanding platform devices and how it works
Understanding ARM-board configuration files
Linux device Tree
Understating various boot modes of AM335x
eMMC OS updating and booting new Debian OS
Serial booting (UART)
TFTP booting
NFS booting
Beaglebone Networking
Busybox compilations and Testing
Configuring and using Buildroot on Beablebone
Writing uEnv dot txt from scratch and Testing
Using I2C tools on BBB
Hardware interfacing projects and 'C' application development using Eclipse IDE
GPIO programming
Interfacing external LEDs, 7 segment displays and code development
Interfacing LCD and related projects
Interfacing MPU6050 sensor and tilt sensing
EEPROM programming
Requirements
Basic knowledge of linux commands may be required
Basic 'C' Programming knowledge may be required but not mandatory
Description
Update: English closed captions have been added, transcript available
Update # 1: MPU6050 interfacing and tilt sensing tutorials added
Update # 2: LCD interfacing tutorials added
The course is designed for Beginners to Advanced audience.
A comprehensive and practical course on learning Embedded Linux systems on Beaglebone hardware
100% hands-on and step by step explanation using hardware
Brief Description
This Course Demystifies learning Embedded Linux Systems and running embedded Linux and its various components on the Beaglebone hardware. See above "what will I learn?? " section to understand what this course promises!
Interesting Hardware interfacing projects and well explained inner working details step by step
'C' application development using Eclipse IDE for your Beaglebone hardware
At the end of each section students will have exciting assignments to complete which strengthen their understanding deeply
Embedded Linux quizzes to test your Understanding.
Q/A support
My promise!
I will personally answer your questions about this material, either privately or in a group discussion. If you are in any way not satisfied, for any reason, you can get, No questions asked a full refund from Udemy within 30 days. But I am confident you won't need to. I stand behind this course 100% and am committed to helping you.
Learning order of FastBit Embedded Brain Academy Courses,
If you are a beginner in the field of embedded systems, then you can take our courses in the below-mentioned order.
This is just a recommendation from the instructor for beginners.
1) Microcontroller Embedded C Programming: absolute beginners(Embedded C)
2) Embedded Systems Programming on ARM Cortex-M3/M4 Processor(ARM Cortex M4 Processor specific)
3) Mastering Microcontroller with Embedded Driver Development(MCU1)
4) Mastering Microcontroller: TIMERS, PWM, CAN, RTC,LOW POWER(MCU2)
5) Mastering Microcontroller: STM32-LTDC, LCD-TFT, LVGL(MCU3)
6) Embedded System Design using UML State Machines(State machine)
7) Mastering RTOS: Hands-on FreeRTOS and STM32Fx with Debugging(RTOS)
8) ARM Cortex M Microcontroller DMA Programming Demystified(DMA)
9) STM32Fx Microcontroller Custom Bootloader Development(Bootloader)
10) Embedded Linux Step by Step using Beaglebone Black(Linux)
11) Linux device driver programming using Beaglebone Black(LDD1)
Who this course is for
Students who are looking to explore the world of Linux on ARM
Professionals or students work on Embedded linux systems
Code:
https://anonymz.com/?https://www.udemy.com/course/embedded-linux-step-by-step-using-beaglebone/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/3114d45c7d0ed1d22fd55f22329e1ed1/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part1.rar
https://rapidgator.net/file/c23c3998f52ed73beb2288b37af33d43/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part2.rar
https://rapidgator.net/file/8852f0ec7ab1adeda40bd832cfbe9a0b/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part3.rar
Code:
https://nitroflare.com/view/8FC8EF20BADB3CC/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part1.rar
https://nitroflare.com/view/31EF55547246548/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part2.rar
https://nitroflare.com/view/792095A907AEAFB/Embedded_Linux_Step_by_Step_Using_Beaglebone_Black.part3.rar
2023 CORE: Data Science and Machine Learning
[Only registered and activated users can see links. Click Here To Register...]
2023 CORE: Data Science and Machine Learning
Published 12/2022
Created by Isaac Faber
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 267 Lectures ( 28h 32m ) | Size: 11.4 GB
A complete survey of all core skills required on the job
What you'll learn
Learn all necessary core skills for Data Analysis, Data Science, and Machine Learning
Understand the first principles of data science and why it is so popular and important
Learn how to use, from scratch, Python, R, SQL, Tableau, and MS Excel for data science
Learn about a broad range of data science and machine learning libraries and resources
Build and host a personal resume and portfolio of data science projects using GitHub Pages
Learn about key supporting skills like Git/version-control, Kaggle, Databases, Command Line tools, and much more!
Learn how to setup development environments from scratch in R and Python
Learn about important related technologies like cloud, docker, and web development,
Learn to deploy a machine learning model using docker
Requirements
Comfortable with high school (primary school) math.
It will be much easier (but not required) if you have some familiarity with some type of computer programming
Description
This is an ambitious course. The goal here is simple: Only teach what you need to know for day 1 of your first data science job. No fluff, nothing out of context, no topics that are not relevant to real world applications. We will cover EVERY core topic and tool required for those new to data science: Python, R, SQL, Useful Math/Stats/Algorithms, Tableau, and Excel in depth. The course will cover skills that align with three different job types:- Data Analyst- General Data Scientist- Machine Learning EngineerYou can expect to learn from first principles the foundational topics and tools used in practice today. We will avoid topics that are not useful or are simply too advanced when starting out. Your journey will be guided by the Data Science Road Map, a collection of the best resources gathered through years of experience by the instructor.In addition, we will survey every important technology required on the job including GitHub, Kaggle, the basics of cloud, web development and docker. With over 200 videos, readings, and assignments, you can be sure you will be well prepared to join the data community.If you are just getting started or want to fill in some of your knowledge gaps this course is for you!
Who this course is for
Those who feels like they don't know where to start with data science and machine learning
Those tired of courses that don't show the entire picture of data science and leave them asking 'now what?'
Those interested in starting a journey into the data science and machine learning career field.
For those wanting to super-charge an existing skill set with the latest techniques and tools.
Code:
https://anonymz.com/?https://www.udemy.com/course/core-data-science-and-machine-learning/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/d80f6ef4b6b8021396c269f038c4147e/2023_CORE_Data_Science_and_Machine_Learning.part1.rar
https://rapidgator.net/file/2b499ed3957a3fe2dabb0bd66922172f/2023_CORE_Data_Science_and_Machine_Learning.part2.rar
https://rapidgator.net/file/6458c6714d8abb62df82fae47df5bf0d/2023_CORE_Data_Science_and_Machine_Learning.part3.rar
Code:
https://nitroflare.com/view/A805911B980FFF7/2023_CORE_Data_Science_and_Machine_Learning.part1.rar
https://nitroflare.com/view/FE9600F22744AB4/2023_CORE_Data_Science_and_Machine_Learning.part2.rar
https://nitroflare.com/view/F272CDE2839A6FC/2023_CORE_Data_Science_and_Machine_Learning.part3.rar
[NEW] Master Spring Boot 3 & Spring Framework 6 with Java
[Only registered and activated users can see links. Click Here To Register...]
[NEW] Master Spring Boot 3 & Spring Framework 6 with Java
Last updated 2/2023
Created by in28Minutes Official
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 380 Lectures ( 37h 55m ) | Size: 14.1 GB
5 Java Spring Boot Projects - REST API, Full Stack React, Docker & AWS. With Spring Data JPA, Spring Security & Testing.
What you'll learn
You will learn to build a Web Application, REST API and Full Stack Application with Spring Boot and Spring Frameworks
You will Master Fundamentals of Spring Framework from Zero, no previous experience required
You will Learn Spring Framework the MODERN WAY - The way Real Projects use it!
You will learn the magic of Spring Boot - Auto Configuration, Spring Initializr and Starter Projects
You will Learn the Best Practices in Developing Awesome Java Spring Applications from an Expert with 20 Years of Programming Experience
You will learn to use a wide variety of Spring Boot Starter Projects - Spring Boot Web, Spring Boot Data JPA
You will Acquire ALL the SKILLS to demonstrate an EXPERTISE with Spring Framework in Your Job Interviews
You will Develop a REAL-TIME project with React and Spring Boot from SCRATCH
You will Become the go to guy for Fixing Java Spring Framework problems in Your Project
You will Understand the LATEST frameworks and technologies, including Spring Boot, Maven, Eclipse, JUnit and Mockito.
Requirements
You have some programming experience with Java
You need ZERO experience with Spring or Spring Boot Frameworks
You have an attitude to learn while having fun :)
Description
You are having a dream! You are doing a course where you learn the fundamentals Java frameworks:#1: Spring Framework#2: Spring Boot#3: JPA and Hibernate. You also learn to build:#1: Web application with Spring and Spring Boot#2: An Amazing REST API with Spring Boot#3: Full stack application with Spring, Spring Boot, React and Spring SecurityIn addition, you also learn #1: Docker#2: Maven#3: Gradle#4: Spring AOP and #5: Spring Security You deploy the applications you build to AWS!You do NOT need to dream about that anymore. This is THE COURSE you need to learn everything you need to know about building real world Java applications and deploying them to the cloud using Spring and Spring Boot Frameworks.I'm Ranga Karanam. I'm the founder of in28minutes and creator of some of the worlds most popular courses on Cloud and DevOps. I'm certified on multiple clouds - Azure, GCP and AWS and I've helped a MILLION learners around the world acquire new tech skills. Rest assured you are in good hands. Spring and Spring Boot Frameworks are the No 1 frameworks for building enterprise apps in the Java world. In this course, you will learn Spring and Spring Boot from ZERO. I'm a great believer that the best way to learn is by doing and we designed this course to be hands-on. You will build a web application, a REST API and full stack application using Spring, Spring Boot, JPA, Hibernate, React, Spring Security, Maven and Gradle. You will learn to containerise applications using Docker. You will learn to deploy these applications to AWS.By the end of the course, you will know everything you would need to become a great Spring and Spring Boot Developer.Are you ready to become an expert on Spring and Spring Boot? Do you want to join 1 MILLION learners having Amazing Learning Experiences with in28Minutes?Look No Further!
Who this course is for
You are beginner Java programmer looking to learn Spring and Spring Boot Frameworks
You are beginner Java programmer looking to build web application, REST API or a Full Stack Application
Code:
https://anonymz.com/?https://www.udemy.com/course/spring-boot-and-spring-framework-tutorial-for-beginners/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/5d96afa895c4536b745e6cb193c64ba8/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part1.rar
https://rapidgator.net/file/03229de631ec44be8230376dd75b9005/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part2.rar
https://rapidgator.net/file/d01234a30dbec09a4ddb3976fa321ffa/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part3.rar
Code:
https://nitroflare.com/view/77507EAF2EC38F1/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part1.rar
https://nitroflare.com/view/53A3C5C801A5279/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part2.rar
https://nitroflare.com/view/3D144FC536913FD/NEW_Master_Spring_Boot_3__Spring_Framework_6_with_Java.part3.rar
Arduino Step By Step: Getting Started 2022
[Only registered and activated users can see links. Click Here To Register...]
Arduino Step By Step: Getting Started 2022
Last updated 10/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 14.90 GB | Duration: 18h 41m
The original comprehensive course designed for new Arduino Makers
What you'll learn
Build simple circuits around the Arduino Uno, that implement simple functions.
Write simple Arduino sketches that can get sensor reading, make LEDs blink, write text on an LCD screen, read the position of a potentiometer, and much more.
Understand what is the Arduino.
Understand what is prototyping.
Understand analog and digital inputs and outputs
Understand the ways by which the Arduino can communicate with other devices
Use the multimeter to measure voltage, current, resistance and continuity
Use protoboards to make projects permanent
be productive with the Arduino IDE, write, compile and upload sketches, install libraries
Understand what is Arduino programming, it's basic concepts, structures, and keywords
Detect and measure visible light, color, and ultraviolet light
Measure temperature, humidity and acceleration
Measure the distance between the sensor and an object in front of it
Detect a person entering a room
Detect a noise
Make noise and play music
Display text on a liquid crystal display
Learn about the Arduino IDE 2.0 and the Arduino Web Editor
Requirements
A Windows, Mac or Linux computer
An Arduino Uno
Electronics parts like resistors, LEDs, sensors, as listed in Section 1 of the course
Essential tools: a mini breadboard, jumper wires, a multimeter, a soldering iron and solder, wire cutter
Be excited about electronics!
Description
UPDATED: OCTOBER 2022My flagship course designed for people new to electronics and programming has received a comprehensive update!I have added new lectures in the first half of the course. You will find the new lectures in sections Know your Arduino Uno , Arduino boards and kits , and The Arduino IDE .In these lectures, I cover the latest developments in Arduino software and hardware, including topics such as the Arduino Web IDE, the upcoming Arduino IDE 2.0, and the modern Arduino MKR and Nano IoT board families.I have also verified all links to external websites and other resources, like data sheets, and in many cases, we have added new links to external resources.------------------------------UPDATED: January 2020I have updated this course with a new section in which you will learn how to use arrays in your Arduino sketches. This is a very useful skill, as you can program repetitive tasks with just a few lines of code. Enjoy!---------------------------------------This is the original, legendary Arduino course on Udemy by Tech Explorations, fanatically supported by Dr Peter Dalmaris. It is trusted by thousands of students and contains over 16 hours of content, quizzes, a GitHub code repository, thousands of active student discussions, and countless downloadable and linked resources.Please don't be confused by other courses with a similar name.---------------------------------------This course is for the new Arduino Maker. Do you have a passion for learning? Are you excited about becoming a Maker with the Arduino?If you answered "yes!" to both, you are ready to start!In this course, I emphasized the importance of getting the basics right and learning to mastery. As an educator for over 15 years, I know first-hand that hitting a roadblock because you lack the fundamental knowledge to progress can be demotivating. In Arduino Step by Step Getting Started, I make sure that in the more than 18 hours of video content, mini projects and quizzes, we cover all the basics so you can enjoy learning about the Arduino.By the end of the course, you will have a good understanding of the capabilities of the Arduino Uno, the best Arduino for people getting started, and you will be familiar with the capabilities of several of its cousins. You will be comfortable with the basic prototyping tools and their usage, the basics of the Arduino programming environment, language and programming.You will be able to use a variety of components, from simple buttons and LEDs to visible colour and ultraviolet light and other environmental sensors.Apart from knowing how to use the components I demonstrate in this course, you will also learn how to read datasheets, how to use libraries on your own, and how to learn the skills you need to create the gadgets you want. With knowledge comes freedom, and I will help you get there.I invite you to review the free lectures in the first section of the course to learn more details about it. If you are excited about becoming a Maker with the Arduino, join many other Makers and me in Arduino Step by Step Getting Started!I look forward to learning with you!
Overview
Section 1: Introduction to the course
Lecture 1 What is this course about?
Lecture 2 Parts you will need
Lecture 3 Tools you will need
Lecture 4 How to get the most out of this course
Lecture 5 Update 2022 brief
Section 2: Know your Arduino
Lecture 6 Introduction to this section
Lecture 7 The Arduino Uno over the years
Lecture 8 Getting to know the Arduino Uno: Atmega328P, USB, Shields
Lecture 9 Getting to know the Arduino Uno: Pins, power, clock
Lecture 10 Using the digital output pins
Lecture 11 Using the digital input pins
Lecture 12 Using the analog output pins
Lecture 13 Using the analog input pins
Section 3: Introduction to communications
Lecture 14 Introduction to this section
Lecture 15 Serial (UART) communications
Lecture 16 I C (TWI) communications
Lecture 17 SPI communications
Section 4: Arduino boards
Lecture 18 Introduction to this section
Lecture 19 Arduinos past and present
Lecture 20 Classic Arduinos
Lecture 21 Meet some members of the Arduino family
Lecture 22 Introducing the Arduino Mega 2560
Lecture 23 Introducing the Arduino Due
Lecture 24 Introducing the Arduino Zero
Lecture 25 Introducing the Arduino 101
Lecture 26 Introducing the Arduino Pro Mini
Lecture 27 Introducing Arduino-compatible boards
Lecture 28 Modern Arduinos
Lecture 29 Arduino MKR
Lecture 30 Arduino Nano
Lecture 31 Kits
Lecture 32 Arduino Student Kit
Lecture 33 Arduino Explore IoT Kit
Lecture 34 Seeed Studio Arduino Sensor kit
Lecture 35 DFRobot Beginner Kit for Arduino
Section 5: Prototyping basics
Lecture 36 Introduction to this section
Lecture 37 Using the breadboard
Lecture 38 Using jumper wires
Lecture 39 The absolutely essential tools
Lecture 40 Powering your Arduino with power supplies
Lecture 41 Using the multimeter to measure voltage
Lecture 42 Using the multimeter to measure current
Lecture 43 The multimeter - Resistance and continuity
Lecture 44 The Arduino Student Kit multimeter
Lecture 45 Introduction to soldering - the soldering iron
Lecture 46 Soldering - preparation and using holders
Lecture 47 Soldering - using wire cutters and fume extractor
Lecture 48 Soldering - Simple maintenance tips for your solder iron
Lecture 49 A demonstration of soldering a header onto a breakout board
Lecture 50 An introduction to protoboards
Section 6: The Arduino IDE
Lecture 51 Introduction to this section
Lecture 52 Arduino IDE 1.8
Lecture 53 Arduino IDE 2.0
Lecture 54 An introduction to the Arduino IDE
Lecture 55 Getting and installing the Arduino IDE
Lecture 56 The Arduino IDE - Understanding the Preferences pane
Lecture 57 The Arduino IDE - Understanding the Menu items
Lecture 58 How to upload a sketch to your Arduino
Lecture 59 How to upload a sketch to your Arduino - For Windows users
Section 7: Arduino programming
Lecture 60 Introduction to this section
Lecture 61 An introduction to Arduino programming
Lecture 62 Understand the basic parts of an Arduino sketch
Lecture 63 Getting started with custom functions
Lecture 64 Creating custom functions and the return keyword
Lecture 65 Using variables
Lecture 66 Understanding variable scope
Lecture 67 Understanding constants
Lecture 68 Introduction to control structures: The "if" statement
Lecture 69 Introduction to control structures: The "while" statement
Lecture 70 Introduction to control structures: The "For" statement
Lecture 71 Introduction to control structures: The "Switch" statement
Lecture 72 Digital output - how to control an LED
Lecture 73 Digital input - how to read the state of a button
Lecture 74 Analog input - how to read the state of a potentiometer
Lecture 75 Analog output - how to create a fading LED
Lecture 76 Introduction to the RGB (color) LED
Lecture 77 Wiring the RGB LED
Lecture 78 RGB LED: creating colors
Lecture 79 Using a library to control an RGB LED with PWM
Lecture 80 Learning more with the Arduino language documentation
Section 8: Arduino programming: Arrays
Lecture 81 Introduction to this section
Lecture 82 Introduction to Arrays
Lecture 83 Arrays, Example 1
Lecture 84 Arrays, Example 2
Lecture 85 Arrays, Example 3
Lecture 86 Arrays, Example 4
Section 9: Measuring light and color
Lecture 87 Introduction to this section
Lecture 88 What is a photoresistor and how to wire it
Lecture 89 How to select the appropriate fixed resistor for a photoresistor
Lecture 90 Using the Ultra-Violet light sensor
Lecture 91 An introduction to the RGB Color sensor
Lecture 92 Wiring the RGB Color sensor
Lecture 93 Mini project: copy a color to an RGB LED using an RGB Color sensor
Section 10: Measuring temperature, humidity and pressure
Lecture 94 Introduction to environment sensors
Lecture 95 Using a DHT22 sensor to measure temperature and humidity
Lecture 96 An introduction to the Thermistor
Lecture 97 Wiring the Thermistor
Lecture 98 How to calculate the temperature from the thermistor resistance
Lecture 99 Thermistor: getting a temperature using a library
Lecture 100 Thermistor: improving the accuracy of analog readings with AREF
Lecture 101 An introduction to measuring temperature with the TMP36
Lecture 102 Wiring the TMP36 and a demonstration sketch
Lecture 103 An alternate wiring of the TMP36
Lecture 104 An introduction to the MCP9808 for very accurate temperature readings
Lecture 105 MCP9808: Wiring
Lecture 106 Using the MCP9808, demo and sketch walkthrough
Lecture 107 MCP9808: A closer look at I2C addressing
Lecture 108 An introduction to measuring barometric pressure with the BMP180
Lecture 109 Wiring the BMP180 and first sketch walkthrough
Lecture 110 A first demo sketch for the BMP180
Lecture 111 A second demo sketch for the BMP180
Section 11: Detecting acceleration
Lecture 112 Introduction to detecting acceleration
Lecture 113 Introduction to detecting acceleration with the ADXL335
Lecture 114 Wiring the ADXL335
Lecture 115 Plugging the ADXL335 directly in the Arduino, and detect its orientation
Lecture 116 Write the sketch for detecting orientation with the ADXL335
Section 12: Detecting objects with the infrared motion sensor
Lecture 117 Introduction to this section
Lecture 118 Introduction to the Passive infra-Red (PIR) motion sensor
Lecture 119 A simple PIR experiment with an LED
Lecture 120 A demonstration of using the PIR sensor with the Arduino
Lecture 121 PIR sensor first demonstration sketch walkthrough
Lecture 122 PIR sensor second demonstration sketch walkthrough
Section 13: Sensing distance
Lecture 123 Introduction to sensing distance
Lecture 124 Introduction to the ultrasonic distance sensor
Lecture 125 Wiring and understanding Trigger and Echo
Lecture 126 How to calculate distance
Section 14: Sensing sound
Lecture 127 Introduction to sensing sound
Lecture 128 Introduction to the analog sound sensor
Lecture 129 A demonstration and sketch of the analog sound sensor
Lecture 130 A demonstration and sketch of the digital sound sensor
Section 15: Making noise with a buzzer
Lecture 131 Introduction to this section
Lecture 132 Introduction to the buzzer
Lecture 133 Playing music
Lecture 134 Control the sound volume
Section 16: The Liquid Crystal Display
Lecture 135 Introduction to this section
Lecture 136 Introduction to the LCD
Lecture 137 LCD wiring in 4-bit parallel mode
Lecture 138 LCD demonstration sketch
Lecture 139 Display sensor data in the LCD
Lecture 140 Connect LCD using the I2C adaptor
Lecture 141 Using the RGB LCD and buttons shield
Section 17: Video Responses
Lecture 142 Why use 3 resistors for the RGB LED, vs. just one resistor on the cathode?
Section 18: Conclusion and Bonus Lecture
Lecture 143 Recap: what you have learned and what's next
Lecture 144 Bonus Lecture
Students over 10 years of age, or younger with with adult supervision. Young students should be supervised at all times when using a soldering iron.,Students with a little or no prior experience with electronics or programming.
Code:
https://anonymz.com/?https://www.udemy.com/course/arduino-sbs-17gs/
[Only registered and activated users can see links. Click Here To Register...]
Code:
https://rapidgator.net/file/46d425bfb9c6b1b055770f8739249feb/Arduino_Step_by_Step_Getting_Started.part1.rar
https://rapidgator.net/file/3ad3fe3b5c36fc7e1a88e71b44e643d5/Arduino_Step_by_Step_Getting_Started.part2.rar
https://rapidgator.net/file/5c5f551725cd0ae970232e16e3b3ec12/Arduino_Step_by_Step_Getting_Started.part3.rar
Code:
https://nitroflare.com/view/CB67216DEF65EA6/Arduino_Step_by_Step_Getting_Started.part1.rar
https://nitroflare.com/view/D28D401B86BAEE7/Arduino_Step_by_Step_Getting_Started.part2.rar
https://nitroflare.com/view/8CB71289C7F2F7E/Arduino_Step_by_Step_Getting_Started.part3.rar
