Arturia Synthx V v1.0.5.6118 U2B macOS
Arturia Synthx V v1.0.5.6118 U2B macOS
[Only registered and activated users can see links. Click Here To Register...]
MORiA | AU | VST | VST3 | AAX | STANDALONE | 432 MB
Synthx V
Multitimbral Analog Synthesizer
Synthx V captures the multitimbral magnificence and dual-layer architecture of the fabled Elka Synthex in unprecedented detail. Elevated with advanced drag-and-drop modulation, effects and expressive keyboard controls - discover the ultimate tool for rich, symphonic analog sounds.
Main Features
Bi-timbral architecture
Solo or Duo (stacked) modes
Stereo Link for extra wide hard panned, twinned layers
4 modes of custom keyboard expressivity
Up to 16 voices of polyphony (8 per layer) and Mono mode
Two virtual analog DCOs
Selectable waveform (Saw, Triangle, Square & Pulse)
Pulse Width Cross Modulation & Ring Modulation
Oscillator 2 Hard Sync
Unison mode per layer
Multimode filter
Curtis CEM3320 emulation
24dB & latent 12dB Low Pass, 6 & 12dB Bandpass, and 12dB High pass modes
Noise generator (White & pink)
BBD-based Chorus with 3 modes
Per-layer LFO with extended routing, additional random waveform and Syncable rate, as well as Mono or Poly modes
New Master LFO with Modwheel side-chain
Innovative Multi-Arp
Create complex counterpoints and generative music with 4 stacked arp layers
Send arp patterns independently to each layer, or both.
Browse and save Multi-Arp settings
30 arp modes with up to 16 steps rhythms, with a continuous octave parameter, note repeat, multiple retrig options and more.
Powerful Effects rack
4 drag-and-drop FX slots
Modulable parameters
17 effects including Super Unison, MultiBand Compressor, Chorus JUN-6 and more.
Advanced drag-and-drop modulation
Drag-and-drop assign, hover-over adjustment
3 Modulations slots
Choose from ADSR envelope, Random and Step modulators or our infinitely shapeable Function generator
Accessible keyboard & macro controls
Freely assignable keyboard velocity, release velocity, keyboard tracking, aftertouch, MPE slide and modwheel sources
Dedicated window for customizing macro settings
Faithful GUI
Colour-coded parameter levels
A/B layer switch
Integrated advanced panel
Extensive library of 240 presets
MTS-ESP microtuning compatibility
MPE compatibility
NKS controller compatible
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Mac OS 11+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or M1 CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU
Homepage:
Code:
https://www.arturia.com/products/software-instruments/synthx-v/overview
Download link
rapidgator.net:
[Only registered and activated users can see links. Click Here To Register...]
nitroflare.com:
[Only registered and activated users can see links. Click Here To Register...]
Arturia Vocoder V v1.6.3.6106 U2B macOS
Arturia Vocoder V v1.6.3.6106 U2B macOS
[Only registered and activated users can see links. Click Here To Register...]
MORiA| AU | VST | VST3 | AAX | STANDALONE | 1.3 GB
Vocoder V
Ultimate voice electrifier
Vocals that sound like synths, synths that sounds like vocals - Bob Moog's original 1979 16-band voice box did everything from robot speech to rich harmonized textures. Vocoder V adds a built-in analog synth, a dedicated sampler, and cutting-edge FX.
Main Features
16 channel Vocoder virtual-analog modeling
Integrated synth section
Dual-oscillator with FM
Waveshaping capabilities
Hard sync and fixed frequencies options
Chord and glide features
Stereo enhancing "ensemble" function
External voice input with pitch tracking feature
Integrated sample player engine
Cycle and keyboard play modes to play back up to 12 samples
700+ included factory samples
Time-stretching to sync loops in bars to DAW bpm
Vocoder bands rerouting from patch bay
Advanced modulation capabilities (envelope follower, LFO and controls assignment)
11 integrated effect types (Reverb Phaser, Flanger, Chorus, Overdrive, Delay, .)
Advanced Brightness, Timbre, Time and Movement macro controls
Over 250 factory presets
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Mac OS 11+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or M1 CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU
Homepage:
Code:
https://www.arturia.com/products/analog-classics/vocoder-v/overview
Download link
rapidgator.net:
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
nitroflare.com:
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Arturia VOX Continental V2 v2.13.3.6106 macOS
Arturia VOX Continental V2 v2.13.3.6106 macOS
[Only registered and activated users can see links. Click Here To Register...]
MORiA | AU | VST | VST3 | AAX | STANDALONE | 458 MB
Vox Continental V
Red-hot transistor hitmaker.
Vox? organs produced the indelible sounds of The Doors, The Animals, Elvis Costello, and even a few Beatles tracks. Vox Continental V puts this sizzling sound front and center in your mix, combining faithful modeling with modern software convenience. Light your fire.
Main Features
Dual manual VOX 300 emulation
Jennings J70 voice engine mode
Classic red/orange VOX skin or UK VOX/Jennings grey skin
Upper manual, lower manual and bass pedal sections
Complete MIDI mapping
Multiple output effects processors
Supports MIDI splits or independent channels per manual
Tight integration with Arturia Keylab MIDI Controller keyboards
VST, VST3, AU, AAX and standalone versions.
EXPANDED mode
Adds a full compliment of drawbars for each harmonic
Adds a new waveform drawbar on each section
Vibrato, tremolo, reverb, overdrive and more effects
Leslie™ and guitar amp simulator outputs
Expanded percussion section with short and long decay times
OPEN mode
Allows for individual tuning of each pitch like a real VOX
Increase or decrease the key contact timing (simulates older key contacts)
Switch between the VOX 300 circuit emulation and the updated Jennings J70 engine.
Increase or decrease the background noise bleed that older VOX/Jennings have.
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Mac OS 11+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or M1 CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU
rapidgator.net:
[Only registered and activated users can see links. Click Here To Register...]
nitroflare.com:
[Only registered and activated users can see links. Click Here To Register...]
GForce Software Oberheim TVS Pro v1.0.0 U2B macOS
GForce Software Oberheim TVS Pro v1.0.0 U2B macOS
Oberheim TVS Pro - A DUOPHONIC LEGEND, REBORN WITH MODERN POWER
In 1975, Tom Oberheim revolutionised synthesiser design with the original TVS - Two Voice Synthesizer. By combining two SEMs and a keyboard, he introduced true duophony to the world-enabling musicians to play two independent voices simultaneously and explore harmonically rich, evolving soundscapes. It was a bold step forward, embraced by visionaries including Martin Gore, Adrian Utley, Peter Baumann, Lorn, The Prodigy, and Nils Frahm.
Key Features
- The most authentic software recreation of the Oberheim TVS Pro
- Over 635 patches, with 220+ new sounds and 400+ converted SEM patches
- Dual 16-step sequencer for real-time pattern building
- Integrated phaser, stereo delay and reverb
- SEM presets can be exported to and imported from OB-E and SEM
- Advanced modulation including velocity and aftertouch support
- Designed in collaboration with Oberheim
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
macOS 10.13 or newer
Intel or Apple Silicon Mac
rapidgator.net:
[Only registered and activated users can see links. Click Here To Register...]
nitroflare.com:
[Only registered and activated users can see links. Click Here To Register...]
OmniReader Pro 3.2.5 macOS
OmniReader Pro 3.2.5 macOS
Read EPUB,CHM,MOBI... use it.. OmniReader is a fully functional book Reader with a simple and beautiful interface and a good reading experience.
▸ Features
- Supports reading EPUB, CHM and Kindle files.
- Support single page search and full text search, and highlight search results.
- Support the forward and backward browsing history.
- Supports page turning, zooming, and sidebar shrinking.
- Support page printing.
- Support to view the basic information of the file.
- Supports file export to EPUB, PDF.
- Support to extract all images in the file.
- Support file coding, deal with the problem of garbled code.
- Support image adaptive, automatically adjust the size of the picture.
▸ Bookrack
- All the files you have read will be saved in the bookshelf for quick review next time.
- Supports file drag and drop addition. Top In-App Purchases: Pro Version - included
Release Notes
Whats New
Supported Operation Systems
macOS 10.13 or later
rapidgator.net:
[Only registered and activated users can see links. Click Here To Register...]
nitroflare.com:
[Only registered and activated users can see links. Click Here To Register...]
